FAQs » Host Connection

Atom Feed Frequently Asked Questions

Suggest a FAQ

Parent Categories

TOP LEVEL

Category: Host Connection

Page 1 of 1 - Items per page:
Q

Can I boot from my MicroNet device?

Q

Can I connect firewire storage along with my firewire capture device?

Q

Do Fantom USB 3.0 drives require a direct-to-host connection or can I use my hub?

Q

I'm having trouble seeing my eSATA device

Q

I'm trying to install the PCI-Express eSATA card in my Dell Poweredge 2450 (or other brand of Intel 5000 based server) but the card is not seen by my system.

A

Some server vendors block the eSATA card in BIOS, or have physical connectivity limitations with their expansion bus risers. You may require an updated firmware to enable the eSATA card. In the case of Dell Poweredge 2x50 servers, it has been reported that the Micronet eSATA card is only supported on the 4 lane (4x) slot and not the 8 lane (8x) slots. For more information please consult your server's user manual or support website.

Q

My USB 3.0 Fantom product works fine with a USB 2.0 Connection but not USB 3.0

Page 1 of 1 - Items per page:
Show ALL Answers  |   TOP   |  Back   |  Suggest a FAQ   |  Atom Feed
Click the question to reveal the answer, click the question once more to hide.

Company, Business and Organisation names used in these FAQs may be trademarks of their respective owners.
Powered by osTicket